 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 100371 Low Power Triple 4-Input Multiplexer with Enable October 1989 Revised August 2000 100371 Low Power Triple 4-Input Multiplexer with Enable General Description The 100371 contains three 4-input multiplexers which share a common decoder (inputs S0 and S1). Output buffer gates provide true and complement outputs. A HIGH on the Enable input (E) forces all true outputs LOW (see Truth Table). All inputs have 50 k pull-down resistors. Features s 35% power reduction of the 100171 s 2000V ESD protection s Pin/function compatible with 100171 s Voltage compensated operating range = -4.2V to -5.7V s Available to industrial grade temperature range Ordering Code: Order Number 100371SC 100371PC 10371QC 10371QI Package Number M24B N24E V28A V28A Package Description 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Industrial Temperature Range (-40C to +85C) Devices also available in Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol Connection Diagrams 24-Pin DIP/SOIC Pin Descriptions Pin Names I0x-I3x S0, S1 E Za-Zc Za-Zc Description Data Inputs Select Inputs Enable Input (Active LOW) Data Outputs Complementary Data Outputs 28-Pin PLCC (c) 2000 Fairchild Semiconductor Corporation DS010148 www.fairchildsemi.com 100371 Truth Table Inputs E L L L L H H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Outputs S1 L L H H X Zn I0x I1x I2x I3x L S0 L H L H X Logic Diagram www.fairchildsemi.com 2 100371 Absolute Maximum Ratings(Note 1) Storage Temperature (TSTG) Maximum Junction Temperature (TJ) VEE Pin Potential to Ground Pin Input Voltage (DC) Output current (DC Output HIGH) ESD (Note 2) -65C to +150C +150C -7.0V to +0.5V VEE to +0.5V Recommended Operating Conditions Case Temperature (TC) Commercial Industrial Supply Voltage (VEE) 0C to +85C -40C to +85C -5.7V to -4.2V -50 mA 2000V Note 1: The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: ESD testing conforms to MIL-STD-883, Method 3015. Commercial Version DC Electrical Characteristics (Note 3) VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = 0C to +85C Symbol VOH VOL VOHC VOLC VIH VIL IIL IIH Parameter Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current I0X-I3X S0, S1, E IEE Power Supply Current -75 340 300 -39 mA Inputs Open A VIN = VIH (Max) -1165 -1830 0.50 Min -1025 -1830 -1035 -1610 -870 -1475 Typ -955 -1705 Max -870 -1620 Units mV mV mV mV mV mV A VIN =VIH (Max) or VIL (Min) VIN = VIH (Min) or VIL (Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Conditions Loading with 50 to -2.0V Loading with 50 to -2.0V Note 3: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions. DIP AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay I0x-I3x to Output Propagation Delay S0, S1 to Output Propagation Delay E to Output Transition Time 20% to 80%, 80% to 20% TC = 0C Min 0.45 0.90 0.65 0.35 Max 1.50 2.40 2.30 1.20 TC = +25C Min 0.45 0.90 0.65 0.35 Max 1.50 2.40 2.30 1.20 TC = +85C Min 0.45 1.00 0.75 0.35 Max 1.60 2.60 2.40 1.20 Units ns ns ns ns Figures 1, 2 Figures 1, 2 (Note 4) Conditions Note 4: The propagation delay specified is for single output switching. Delays may vary up to 300 ps with multiple outputs switching. 3 www.fairchildsemi.com 100371 Commercial Version (Continued) SOIC and PLCC AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tPLH tPHL tTLH tTHL tOSHL Parameter Propagation Delay I0x-I3x to Output Propagation Delay S0, S1 to Output Propagation Delay E to Output Transition Time 20% to 80%, 80% to 20% Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOSLH Maximum Skew Common Edge Output-to-Output Variation Data to Output Path tOST Maximum Skew Opposite Edge Output-to-Output Variation Data to Output Path tPS Maximum Skew Pin (Signal) Transition Variation Data to Output Path Note 5: The propagation delay specified is for single output switching. Delays may vary up to 300 ps with multiple outputs switching. Note 6: Output-to-Output Skew is defined as the absolute value of the difference between the actual propagation delay for any outputs within the same packaged device. The specifications apply to any outputs switching in the same direction either HIGH-to-LOW (tOSHL), or LOW-to-HIGH (tOSLH), or in opposite directions both HL and LH (tOST). Parameters tOST and tPS guaranteed by design. TC = 0C Min 0.45 0.90 0.65 0.35 Max 1.30 2.20 2.10 1.10 TC = +25C Min 0.45 0.90 0.65 0.35 Max 1.30 2.20 2.10 1.10 TC = +85C Min 0.45 1.00 0.75 0.35 Max 1.40 2.40 2.20 1.10 Units Conditions ns ns ns ns Figures 1, 2 PLCC only Figures 1, 2 (Note 5) 400 400 400 ps (Note 6) PLCC only 490 490 490 ps (Note 6) PLCC only 490 490 490 ps (Note 6) PLCC only 430 430 430 ps (Note 6) www.fairchildsemi.com 4 100371 Industrial Version PLCC DC Electrical Characteristics (Note 7) VEE = -4.2V to -5.7V, VCC = VCCA = GND, TC = -40C to +85C TC = -40C Symbol Parameter Min Max VOH VOL VOHC VOLC VIH VIL IIL IIH Output HIGH Voltage Output LOW Voltage Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Input LOW Current Input HIGH Current I0X-I3X S0, S1, E IEE Power Supply Current -75 340 300 -35 -75 340 300 -39 mA Inputs Open A VIN = VIH (Max) -1170 -1830 0.50 -1085 -1830 -1095 -1565 -870 -1480 -1165 -1830 0.50 -870 -1575 TC = 0C to +85C Min -1025 -1830 -1035 -1610 -870 -1475 Max -870 -1620 Units mV mV mV mV mV mV A Conditions VIN =VIH (Max) or VIL(Min) VIN = VIH (Min) or VIL(Max) Guaranteed HIGH Signal for All Inputs Guaranteed LOW Signal for All Inputs VIN = VIL (Min) Loading with 50 to -2.0V Loading with 50 to -2.0V Note 7: The specified limits represent the "worst case" value for the parameter. Since these values normally occur at the temperature extremes, additional noise immunity and guardbanding can be achieved by decreasing the allowable system operating ranges. Conditions for testing shown in the tables are chosen to guarantee operation under "worst case" conditions. PLCC AC Electrical Characteristics VEE = -4.2V to -5.7V, VCC = VCCA = GND Symbol tPLH tPHL tPLH tPHL tPLH tPHL tTLH tTHL Parameter Propagation Delay I0x-I3x to Output Propagation Delay S0, S1 to Output Propagation Delay E to Output Transition Time 20% to 80%, 80% to 20% TC = -40C Min 0.40 0.70 0.65 0.20 Max 1.30 2.20 2.10 1.60 TC = +25C Min 0.45 0.90 0.65 0.35 Max 1.30 2.20 2.10 1.10 TC = +85C Min 0.45 1.00 0.75 0.35 Max 1.40 2.40 2.20 1.10 Units ns ns ns ns Figures 1, 2 Figures 1, 2 (Note 8) Conditions Note 8: The propagation delay specified is for single output switching. Delays may vary up to 300 ps with multiple outputs switching. 5 www.fairchildsemi.com 100371 Test Circuitry Notes: VCC, VCCA = +2V, VEE = -2.5V L1 and L2 = equal length 50 impedance lines RT = 50 terminator internal to scope Decoupling 0.1 F from GND to VCC and VEE All unused outputs are loaded with 50 to GND CL = Fixture and stray capacitance 3 pF FIGURE 1. AC Test Circuit Switching Waveforms FIGURE 2. Propagation Delay and Transition Times www.fairchildsemi.com 6 100371 Physical Dimensions inches (millimeters) unless otherwise noted 24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide Package Number M24B 24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-010, 0.400 Wide Package Number N24E 7 www.fairchildsemi.com 100371 Low Power Triple 4-Input Multiplexer with Enable Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 28-Lead Plastic Lead Chip Carrier (PLCC), JEDEC MO-047, 0.450 Square Package Number V28A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com |
Price & Availability of 100371PC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |